|
Numerical and analogue modelling studies |
1 Laboratoire Dynamique de la Lithosphère (UMR 5573), C. C. 060, Université Montpellier II, Place E. Bataillon, 34095 Montpellier cedex 5, France
Experiments aiming to study the conditions of fracture localization during buckle folding in brittle sedimentary layers of the upper crust were conducted using brittle paraffin wax multilayers submitted to axial and vertical load. The particular aim was to understand the mechanisms of development of subtle features often observed in apparently rounded natural folds. These consist of scarcely visible discontinuous fractured zones, more or less parallel to the fold axis, that separate domains of constant dip. These zones are of great interest for fluid dynamics in folded fractured reservoirs. It is shown that such axial kink boundaries referred to as dip-domain boundaries (DDBs) play a major role in the development of curvature in fractured buckle folds. DDBs observed in experiments consist of the localization and coalescence of tensile fractures along axial planes after the elastic instability stage. The tested physical parameters were (1) the intensity of the vertical load, (2) the bed thickness within a mechanical unit of constant thickness, (3) the stiff (multilayer)-soft (embedding material) thickness ratio and (4) the interlayer friction. In low interlayer friction conditions DDBs remain relatively localized during shortening, leading to chevron-style folds. With high interlayer friction conditions, DDBs tend to multiply laterally from an initial chevron fold. The latter phenomenon leads towards a more rounded fold, but one that still shows discontinuous curvature comparable to that observed in natural conditions. Fold models of flexural slip and tangential longitudinal strain (orthogonal flexure) are discussed under the influence of tensile failure in multilayer materials.
