Lyell Collection
Geological Society, London, Special Publications
Lyell Centre  |   Lyell Collection  |   Subscriptions   |   Geological Society  |   Email alerts  |   Online bookshop  |   Help

Keywords:
Author:
Advanced search>>
This Article
Right arrow Full Text (PDF)
Right arrow References
Right arrow Alert me when this article is cited
Right arrow Alert me if a correction is posted
Right arrow Citation Map
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Alert me to new issues of the journal
Right arrow Download to citation manager
Right arrow Request Permissions
Citing Articles
Right arrow Citing Articles via HighWire
Right arrow Citing Articles via Google Scholar
Google Scholar
Right arrow Articles by Atkinson, T. C.
Right arrow Articles by Davison, R. M.
Right arrow Search for Related Content
GeoRef
Right arrow GeoRef Citation
Geological Society, London, Special Publications; 2002; v. 193; p. 15-40;
DOI: 10.1144/GSL.SP.2002.193.01.02
© 2002 Geological Society of London

Approaches to Groundwater Resources Management

Is the water still hot? Sustainability and the thermal springs at Bath, England

T. C. Atkinson1,2 & R. M. Davison2,3

1 Groundwater Tracing Unit, Department of Geological Sciences, University College London, Gower Street, London WC1E 6BT, UK t.atkinson{at}ucl.ac.uk
2 School of Environmental Sciences, University of East Anglia, Norwich NR4 7TJ, UK
3 Groundwater Protection and Restoration Group, Department of Civil and Structural Engineering, University of Sheffield, Sheffield S1 3JD, UK

The hot springs at Bath are the largest natural thermal source in Britain. Sustainable use of the waters for a spa requires maintenance of their temperature and flow rate. Together with smaller springs at Hotwells, Bristol, they form the outflow from a regional thermal aquifer that occurs where the Carboniferous Limestone is buried at depths > 2.7 km in the Bristol-Bath structural basin. The aquifer is recharged via limestone outcrops forming the south and west portions of the basin rim. Current knowledge of the basin’s structure is reviewed, and important uncertainties identified concerning the hydrogeological role of thrust faults which may cut the limestone at depth. A simple numerical model is used to determine the possible influence of thrusts upon groundwater flow within the thermal aquifer. Comparison of the modelled flow patterns with geochemical data and structure contours eliminates the hypothesis that thrusts completely disrupt the continuity of the aquifer. The most successful model is used to simulate the possible impact of dewatering by large quarries at the limestone outcrops north and south of Bath. Substantial reductions in modelled flow at Bath result from proposed dewatering in the eastern Mendips, although the steady-state approach adopted has severe limitations in that it does not take account of the incremental staging of actual dewatering, nor allow for partial restitution of groundwater levels. The geological uncertainties highlighted by the modelling could be addressed by future research into the effect of thrusts on the continuity of the Carboniferous Limestone. More refined modelling to predict the timing of possible impacts of quarry dewatering will require measurements of the storativity of the thermal aquifer.





This article has been cited by other articles:


Home page
 Geological Society, London, Special PublicationsHome page
K. M. Hiscock, M. O. Rivett, and R. M. Davison
Sustainable groundwater development
Geological Society, London, Special Publications, 2002; 193: 1 - 14.
[Abstract] [PDF]